合肥生活安徽新聞合肥交通合肥房產生活服務合肥教育合肥招聘合肥旅游文化藝術合肥美食合肥地圖合肥社保合肥醫院企業服務合肥法律

        代做COMP2012J、java編程語言代寫
        代做COMP2012J、java編程語言代寫

        時間:2024-12-19  來源:合肥網hfw.cc  作者:hfw.cc 我要糾錯



        Operating Systems
        Assignment 02: Memory Management
        COMP2012J
        2024-25
        1 Memory Management Simulator
        Please find the memory management source files from the moodle. This simulator illustrates page fault behaviour
        in a paged virtual memory system. The program reads the initial state of the page table and a sequence of
        virtual memory instructions and writes a trace log indicating the effect of each instruction.
        To make things easier for you, we have implemented the FIFO page replacement algorithm already. Please
        go through the implementation carefully so that you can work out how to write your own page replacement
        algorithms. Please go through the instructions carefully and complete the assignment.
        2 Running the simulator
        • Compile the java code using the following command.
        1 $ javac *. java
        • The program reads a command file, configuration file, and writes a trace file.
        • You can run the program by running the following command.
        1 $ java MemoryManagement commands memory . conf
        • ‘commands’ refers to the file where we state the command sequence we need to run on the system.
        • ‘Memory.conf’ file has the initial configuration of the system.(i.e: ’memory FIFO.conf’)
        2.1 The command file
        The command file for the simulator specifies a sequence of memory instructions to be performed. Each instruction
         is either a memory READ or WRITE operation, and includes a virtual memory address to be read or
        written. Depending on whether the virtual page for the address is present in physical memory, the operation
        will succeed, or, if not, a page fault will occur.
        2.1.1 Operations on Virtual Memory
        There are two operations one can carry out on pages in memory: READ and WRITE. The format for each
        command is,
        1 operation address
        Or
        1 operation random
        where the operation is READ or WRITE, and the address is the numeric virtual memory address, optionally
        preceded by one of the radix keywords bin, oct, or hex. If no radix is supplied, the number is assumed to be
        decimal.
        The keyword random will generate a random virtual memory address (for those who want to experiment quickly)
        rather than having to type an address.
        For example, the sequence,
        1 READ bin 01010101
        2 WRITE bin 10101010
        3 READ random
        4 WRITE random
        causes the virtual memory manager to:
         University College Dublin 1Operating Systems
        Assignment 02: Memory Management
        COMP2012J
        2024-25
        1. Read from virtual memory address 85
        2. Write to virtual memory address 170
        3. Read from some random virtual memory address
        4. Write to some random virtual memory address
        2.2 The Configuration File
        The configuration file memory.conf is used to specify the initial content of the virtual memory map (which pages
        of virtual memory are mapped to which pages in physical memory) and provide other configuration information,
        such as whether the operation should be logged to a file.
        2.2.1 Setting Up the Virtual Memory Map
        The ’memset’ command is used to initialize each entry in the virtual page map. ’memset’ is followed by six
        integer values:
        1. The virtual page number to initialize
        2. The physical page number associated with this virtual page (-1 if no page assigned)
        3. If the page has been read from (R) (0=no, 1=yes)
        4. If the page has been modified (M) (0=no, 1=yes)
        5. The amount of time the page has been in memory (in ns)
        6. The last time the page has been modified (in ns)
        The first two parameters define the mapping between the virtual page and a physical page if any. The last four
        parameters are values that might be used by a page replacement algorithm.
        For example:
        1 memset 34 23 0 0 0 0
        specifies that virtual page 34 maps to physical page 23, and that the page has not been read or modified.
        Note:
        • Each physical page should be mapped to exactly one virtual page.
        • The default number of virtual pages is 64 (0..63).
        • The number of physical pages cannot exceed 64 (0..63).
        • If a virtual page is not specified by any ’memset’ command, it is assumed that the page is not mapped.
        • ’memset’ commands must be defined at the end of the configuration file.
        2.2.2 Other Configuration File Options
        There are several other options which can be specified in the configuration file. These are summarized in the
        table below.
        University College Dublin 2Operating Systems
        Assignment 02: Memory Management
        COMP2012J
        2024-25
        Keyword Values Description
        enable logging
        true
        false
        Whether logging of the operations should be enabled. If logging is
        enabled, then the program writes a one-line message for each READ
        or WRITE operation. By default, no logging is enabled. See also the
        ’log file’ option.
        log file trace-file-name
        The name of the file to which log messages should be written. If no
        filename is given, then log messages are written to stdout. This option
        has no effect if ’enable logging’ is false or not specified.
        pagesize
        n
        power p
        The size of the page in bytes. This can be given as
        a decimal number which is a power of two (1, 2, 4, 8, etc.) or as a
        power of two using the power keyword. The maximum page size is
        67108864 or power 26. The default page size is power 26.
        addressradix n
        The radix in which numerical values are displayed. The default radix is
        2 (binary). You may prefer radix 8 (octal), 10 (decimal), or 16
        (hexadecimal).
        physicalMemSize n The size of the physical memory as a measurement of the number of pages.
        replacementAlgorithm FIFO |LRU |Clock policy The page replacement algorithm to use in the simulator.
        2.3 The Output File
        The output file contains a log of the operations since the simulation started. It lists the command that was
        attempted and what happened as a result. You can review this file after executing the simulation.
        The output file contains one line per operation executed. The format of each line is:
        1 command address ... status
        Where:
        • command is READ or WRITE.
        • address is a number corresponding to a virtual memory address.
        • status is okay or page fault.
        Example:
        1 READ 10000000 ... okay
        2 READ 10000000 ... okay
        3 WRITE c0001000 ... page fault
        3 Assignment
        3.1 Task 1
        • Read and understand the simulator and the implementation of the FIFO algorithm.
        • Run the program with the ’commands’ file and the ‘memory_FIFO.conf’ file.
        • Identify how the FIFO algorithm works.
        3.2 Task 2
        • Implement Least recently used(LRU) page replacement algorithm in the ‘PageFault.java’ and call it
        within the ‘replacePage()’ method.
        • Use the ‘tracefile_LRU’ as a reference for what your output should look like when you run the program
        with the ‘commands’ file and the ‘memory_LRU.conf’ file.
        University College Dublin 3Operating Systems
        Assignment 02: Memory Management
        COMP2012J
        2024-25
        3.3 Task 3
        • Implement the Clock-policy page replacement algorithm in the ‘PageFault.java’ and call it within the
        ‘replacePage()’ method.
        • Use the ‘tracefile_clock’ as a reference for what your output should look like when you run the program
        with the ‘commands’ file and the ‘memory_clock.conf’ file.
        4 Submission
        • You do not have to worry about the input type of the addresses while implementing page replacement
        algorithms since all the addresses are converted and saved as decimal numbers by the kernel.
        • Submit the ‘PageFault.java’ file to the submission link in the moodle before the deadline.
        • Please keep the code clean and add comments. There will be marks for the code quality and comments.
        Your submission will be tested against inputs that we have designed.
        • Do NOT change any source file other than the ’PageFault.java’.
        • Do NOT change the function interfaces of any functions in the ’PageFault.java’. Any change will result
        in your code failing the tests.
        • If you need more static variables for your implementation you can define them without changing other
        data structures inside the ’PageFault.java’.
        • Do NOT output anything other than what has been asked for. If you have added any outputs for your
        convenience, you should remove/comment them before submission.
        University College Dublin 4

        請加QQ:99515681  郵箱:99515681@qq.com   WX:codinghelp



         

        掃一掃在手機打開當前頁
      1. 上一篇:代做DI11004、Java,Python編程代寫
      2. 下一篇:MATH2033代做、代寫Java,Python編程
      3. 無相關信息
        合肥生活資訊

        合肥圖文信息
        急尋熱仿真分析?代做熱仿真服務+熱設計優化
        急尋熱仿真分析?代做熱仿真服務+熱設計優化
        出評 開團工具
        出評 開團工具
        挖掘機濾芯提升發動機性能
        挖掘機濾芯提升發動機性能
        海信羅馬假日洗衣機亮相AWE  復古美學與現代科技完美結合
        海信羅馬假日洗衣機亮相AWE 復古美學與現代
        合肥機場巴士4號線
        合肥機場巴士4號線
        合肥機場巴士3號線
        合肥機場巴士3號線
        合肥機場巴士2號線
        合肥機場巴士2號線
        合肥機場巴士1號線
        合肥機場巴士1號線
      4. 短信驗證碼 酒店vi設計 NBA直播 幣安下載

        關于我們 | 打賞支持 | 廣告服務 | 聯系我們 | 網站地圖 | 免責聲明 | 幫助中心 | 友情鏈接 |

        Copyright © 2025 hfw.cc Inc. All Rights Reserved. 合肥網 版權所有
        ICP備06013414號-3 公安備 42010502001045

        国产精品三级视频| 久久国产精品麻豆映画| 国产精品jizz观看| 99热在线精品免费全部my| 久久99精品久久久久久久不卡| 国产精品污WWW在线观看| 久久久久一级精品亚洲国产成人综合AV区| 日韩一级视频免费观看| 日韩精品久久无码人妻中文字幕 | 国产精品亚洲精品久久精品| 亚洲精品美女久久久久| 久久精品国产亚洲AV无码偷窥| 久久精品私人影院免费看| 免费视频精品一区二区三区| 精品日韩亚洲AV无码一区二区三区| 亚洲精品无码专区2| 日韩高清不卡在线| 中日韩无砖码一线二线| 丰满日韩放荡少妇无码视频| 国产在线麻豆精品观看| 国产精品久久亚洲一区二区| 国产精品第一页爽爽影院| 成人国产精品视频频| 国产精品另类激情久久久免费| 青青国产精品视频| 成人国产精品2021| 国产精品任我爽爆在线播放| 毛片亚洲AV无码精品国产午夜 | 久久久一本精品99久久精品36| 国产精品俺来也在线观看| 国产成人亚洲精品| 国产四虎免费精品视频| 精品久久久无码21p发布 | 日韩视频在线观看免费| 久久久无码精品亚洲日韩蜜桃 | 欧美日韩精品一区二区在线视频| 久久久无码精品亚洲日韩按摩| 日韩精品久久无码中文字幕| 日韩影视在线观看| 日韩人妻无码免费视频一区二区三区 | 精品亚洲麻豆1区2区3区|