合肥生活安徽新聞合肥交通合肥房產生活服務合肥教育合肥招聘合肥旅游文化藝術合肥美食合肥地圖合肥社保合肥醫院企業服務合肥法律

        代寫FN6806、代做c/c++,Python程序語言
        代寫FN6806、代做c/c++,Python程序語言

        時間:2024-12-20  來源:合肥網hfw.cc  作者:hfw.cc 我要糾錯



        FN6806: Object Oriented Programming II
        Problems - Set 3
        Question 3-1
        Implement Vasicek model for interest rate simulation

        • Use Euler-Maruyama method to generate the paths. returned value is a tuple: 1) the end
        rates of all paths, 2) the sum of all rates of all paths (except the starting   0
        ).
        • You could use either vector or valarray for the result.
        auto vasicek(double sd, double kappa, double r_mean, double r0,
        double T, int paths, int steps, mt19937 &gen) {
        double dt = T / steps;
        vector<double> sum_rates(paths);
        vector<double> end_rates(paths);
        ^^.
        return make_tuple(end_rates, sum_rates);
        }
        auto vasicek_valarray(double sd, double kappa, double r_mean,
        double r0, double T, int paths, int steps, mt19937 &gen) {
        double dt = T / steps;
        valarray<double> sum_rates(0.0, paths);
        valarray<double> end_rates(r0, paths);
        ^^.
        return make_tuple(end_rates, sum_rates);
        }
        • Below is my test code and result as reference. You could adapt it to test your result.
        seed_seq seed{**127};
        auto mtgen = mt19937{seed};
        auto [end_rates, sum_rates] =
        vasicek(sd, kappa, r_mean, r0, T, 20'000, int(0.5 * 365),
        mtgen);
        auto end_rates_avg =
        accumulate(end_rates.begin(), end_rates.end(), 0.0) /
        end_rates.size();
        1auto sum_rates_avg =
        accumulate(sum_rates.begin(), sum_rates.end(), 0.0) /
        sum_rates.size();
        cout ^< end_rates_avg ^< ", " ^< sum_rates_avg ^< "\n";
        ^/ 0.0495695, 9.05915
        mtgen.seed(seed);
        auto [end_rates2, sum_rates2] =
        vasicek_valarray(
        sd, kappa, r_mean, r0, T, 20'000, int(0.5 * 365), mtgen);
        end_rates_avg =
        accumulate(end_rates2.begin(), end_rates2.end(), 0.0) /
        end_rates2.size();
        sum_rates_avg =
        accumulate(sum_rates2.begin(), sum_rates2.end(), 0.0) /
        sum_rates2.size();
        cout ^< end_rates_avg ^< ", " ^< sum_rates_avg ^< "\n";
        ^/ 0.0495608, 9.06302
        2Question **
        A simulator for event-driven backtesting.
        There are two approaches in backtesting trading strategy: vectorized and event-driven.
        The vectorized approach is the most common one and consists of simulating the strategy directly
         on historical data. The price series are loaded as vectors and we use vectorized operations
         for both the trading strategy and the performance metrics.
        For example, we can have a buy signal whenever Close > Open and sell signal whenever Close
        < Open, and porformance metric is the **day lagged signal times the return of the next day
        (assuming buy at next day Open). It’s fast to implement such backtesting. However, if we want
        to simulate for adding the number of orders when we have 2nd buy signal, we need to modify
        the algorithm but it will not be easy. Vectorized method can not simulate the execution of
        orders realistically. At all, it is a simpliffed approach towards backtesting.
        The event-driven approach is more sophiscated as it simulates the strategy as if it was executed
        in real-time. The price series are loaded as a stream of ticks and the strategy is executed on
        each tick, and various modules can be added at both sides: the exeuction side and the strategy
         side. For example, the exeuction could simulation the price slippage of the execution, the
        strategy side could simulate for stop loss and dynamic order sizing depends on past performance.
        The event-driven approach is more ffexible and more realistic, but it is more difffcult
        to implement.
        In this exercise, you will read the source code of an event-driven simulator and try to understand
         how it works. You will need to document 5 places that exception could occur, what is the
        error message, what could be the cause of the error and what could be the exception handling.
        Create a ffle exceptions.txt and write down your answers.
        This project will also be used in the Final quiz, so you should get familiar with it.
        About the simulator:
        • The author of this repo only made a start so it’s just a partial implementation. You would
        ffnd many rough edges: incomplete and incorrect.
        • In one-line explaination, it runs over a CSV ffle with each line as a tick. The trading
        strategy acts on the tick data and perform buy/sell operations.
        • All cpp ffles are in \src
        • All hpp ffles are in \include
        Use Replit tools
        • When you press Run button, the program shasll run in the Console. However, you need
        to scroll back in history for the output.
        • You could use Code Search (Shortcut: Ctrl+Shift+F) to search for text in the project.
        • For manual mode, usually you don’t need to, you could open the Shell tool to type make
        for compilation and then type ./main to run the program. make shall auto-detect any
        recently changed ffle and recompile the program. If you want to recompile every thing,
        make clean and then make.
        3Aku’s class organization
        • I created a simple chart to show the class organization of Aku’s simulator. You could use
        it as a reference.
        4

        請加QQ:99515681  郵箱:99515681@qq.com   WX:codinghelp



         

        掃一掃在手機打開當前頁
      1. 上一篇:代寫INFS2044、代做Python設計編程
      2. 下一篇:CHC5028代做、代寫C/C++設計編程
      3. ·代寫CS-UY 4563、Python程序語言代做
      4. ·&#160;COMP338編程代做、代寫Python程序語言
      5. ·CDS523編程代寫、代做Python程序語言
      6. ·COMP0035代做、代寫python程序語言
      7. ·代寫2530FNW、代做Python程序語言
      8. ·代寫CIS5200、代做Java/Python程序語言
      9. ·代寫CS 417編程、代做Python程序語言
      10. ·代做ELEC5307、python程序語言代寫
      11. ·COMP5328代做、代寫Python程序語言
      12. ·CMP5321代做、代寫Python程序語言
      13. 合肥生活資訊

        合肥圖文信息
        急尋熱仿真分析?代做熱仿真服務+熱設計優化
        急尋熱仿真分析?代做熱仿真服務+熱設計優化
        出評 開團工具
        出評 開團工具
        挖掘機濾芯提升發動機性能
        挖掘機濾芯提升發動機性能
        海信羅馬假日洗衣機亮相AWE  復古美學與現代科技完美結合
        海信羅馬假日洗衣機亮相AWE 復古美學與現代
        合肥機場巴士4號線
        合肥機場巴士4號線
        合肥機場巴士3號線
        合肥機場巴士3號線
        合肥機場巴士2號線
        合肥機場巴士2號線
        合肥機場巴士1號線
        合肥機場巴士1號線
      14. 短信驗證碼 酒店vi設計 NBA直播 幣安下載

        關于我們 | 打賞支持 | 廣告服務 | 聯系我們 | 網站地圖 | 免責聲明 | 幫助中心 | 友情鏈接 |

        Copyright © 2025 hfw.cc Inc. All Rights Reserved. 合肥網 版權所有
        ICP備06013414號-3 公安備 42010502001045

        国产精品午夜无码av体验区| 国产成人亚洲精品| 亚洲精品久久久www | 国产午夜精品免费一区二区三区| 日韩人妻潮喷中文在线视频| 国产三级精品三级在线专区 | 久久久精品国产免大香伊| 国产玖玖玖九九精品视频| 日韩亚洲产在线观看| 国产精品爽爽va在线观看无码 | 一区二区三区免费精品视频| 亚洲欧洲中文日韩av乱码| 国产老女人精品免费视频| 久久久久人妻一区精品性色av| 中文无码精品一区二区三区| 亚洲国产精品久久久久秋霞影院 | 人妻精品久久久久中文字幕一冢本| 亚洲精品无码午夜福利中文字幕| 精品国产乱码久久久久久浪潮| 亚洲精品无码久久久| 无码人妻精品一区二区三区99不卡 | 国产精品理论片在线观看| 亚洲日韩中文字幕天堂不卡| 99re8这里有精品热视频免费| 免费91麻豆精品国产自产在线观看| 国产精品美女网站在线观看| 亚洲&#228;v永久无码精品天堂久久| 中日韩精品无码一区二区三区| 中文字幕日韩三级| 日韩精品无码免费专区网站| 国产aⅴ精品一区二区三区久久| 国产精品91在线播放| 国产午夜福利久久精品| 国产成品精品午夜视频| 国产伦精品一区二区三区免费下载| 国产亚洲高清在线精品不卡| 国产一区二区三区精品久久呦| 日韩一级片免费观看| 日韩精品福利片午夜免费观着 | www亚洲精品久久久乳| 日韩精品电影一区|